COMPLEX EP
PRODUCT DESCRIPTION
- Available in NLGI Grade 0, 1, 2, 3
- Lithium complex soap and highly refined mineral oil based greases
- For use in temperature that general lithium grease cannot stand
- Contain unleaded EP additive, inhibitors for oxidation, rust and corrosion
- Lithium complex thickener provides high dropping point and stability
APPLICATIONS
- Wheel bearing of passenger car, bus, truck, farm, construction equipment and other commercial vehicles
- Lubrication of loaded slide, ball and various shock loaded or vibrating parts in transport, agriculture and off-load vehicles.
- Recommended temperature range : -20oC – 160oC
BENEFITS
- Good resistance to heat to avoid excessive softening or hardening
- High wear protection and oxidation stability
- Good protection against rust, corrosion and water washout
- Excellent for automotive application
TECHNICAL SPECIFICATION
| Test Items | Unit | Test Method | NLGI | |||
| 0 | 1 | 2 | 3 | |||
| Thickener | – | – | Lithium Complex Soap | |||
| Appearance | – | Visual | Smooth | Red | Green | Natural |
| Worked Penetration (25°C, 60 strokes) | 0.1mm | ASTM D 217 | 355-385 | 310-340 | 265-295 | 220-250 |
| Water Washout | Wt% | ASTM D 1264 | – | Max. 2.0 | ||
| Oil Separation | Wt% | ASTM D 6184 | – | Max. 2.0 | ||
| Dropping Point | oC | ASTM D 2265 | – | Min. 265 | ||
| Copper Corrosion | – | ASTM D 4048 | – | Max. 1b | ||
| 4-Ball EP Test Welding Point | kgf | ASTM D 2596 | Min. 315 | |||
| 4 Ball Wear Test | mm | ASTM D 2266 | Max. 0.6 | |||
Disclaimer :
The information contained in this documents is indicative only and not legally bindingfor RC Grease & Lubricants. The listed products are subject to availability and / or change. Reserves the right to modify the information in case of any changes, including withdrawal,with regard to any of its products or any elements thereof. For further information, please also refer to our Product Data Sheets and the Material Safety Data Sheets.